Product Description 280g
KIMBO Sanitary Anti Mould Sealant is a versatile sanitary formulated neutral sealant which cures under influence of humidity to form a durable high density rubber.
Benefits
• Versatile sealant
• Mould resistant
• Good resistance to UV, water and weather
Applications
KIMBO Sanitary Anti Mould Sealant has been specially developed for durable elastic sealing of expansion joints in concrete, brickwork, curtain wall constructions, glazing systems(1), kitchens, bathrooms, showers and for industrial applications.
Remark (1)
Compatibility of the edge seals of insulation glass with glazing sealants cannot be guaranteed by the supplier of the sealant, as the composition of the edge seals can be changed by the producer without mentioning. Advices concerning the compatibility of glazing sealants to the edge seals of insulation glass are based on experience and therefore not guaranteed.
Directions of Use
A joint with the correct dimensions is able to absorb movements between building materials. The joint depth should always be in the correct relationship of the joint width. A general rule is the ratio of joint
depth to the width of the joint with a joint width till 5 mm is 1:1, with a minimum of 5 mm in width and depth. For joints wider than 5 mm, the depth is the width divided by 3 plus 3mm.
Limitations
• Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates
• Discoloration can occur in dark places and by contact with chemicals
Surface Preparations and Finishing
Application temperature: +5°C to +40°C (applies to environment and substrates). All substrates must be solid, clean, dry, and free from grease and dust. Clean substrates with KIMBO Cleaner. KIMBO Sanitary Anti Mould Sealant adheres perfectly without the use of a primer to most non porous substrates. Always test adhesion prior to application. Use finisher to smooth the joint.
Paintability
KIMBO Sanitary Anti Mould Sealant is not paintable. It is recommended to cover the edges of the joint with masking tape in order to prevent that surfaces which remain to be painted will be contaminated with silicone.
