Name: RD-Aquasorb - 比利時破天荒防潮漆 5L
SKU: 64bfef017516bc0017f05d84
Price: 1480.0 HKD
Availability: PreOrder

分類

RD-Aquasorb - 比利時破天荒防潮漆 5L

Single-component water-based anti-condensation paint. Absorbs then releases moisture when the air becomes dry again.

RD-Aquasorb is based on a styrenated acrylic dispersion. The coating is applied in rooms subject to regular condensation on ceilings and walls. It helps to prevent the growth of mold

HK$2,200.00

HK$1,480.00

{{shoplineProductReview.avg_score}} {{'product.product_review.stars' | translate}} | {{shoplineProductReview.total}} {{'product.product_review.reviews' | translate}}

{{amazonProductReview.avg_rating}} {{'product.product_review.stars' | translate}} | {{amazonProductReview.total_comment_count}} {{'product.product_review.reviews' | translate}}

SHIPPING STARTS MID-AUGUST

一次最大商品購買數量限制為 99999

該數量不適用，請填入有效的數量。

售完

若想購買，請聯絡我們。

加入追蹤清單

商品描述

Usage：

5L = 60ft2

(2 coatings with a suitable primer for porous substrates)

USE:

Single-component water-based anti-condensation paint. Absorbs then releases moisture when the air becomes dry again.

FEATURES:

RD-Aquasorb is based on a styrenated acrylic dispersion. The coating is applied in rooms subject to regular condensation on ceilings and walls. It helps to prevent the growth of mold, watermarks, or drops and runoffs.

RD-Aquasorb will absorb water from condensation in the room that will later be released as vapour once the room is ventilated, and the humidity level becomes lower.

It can therefore not be overpainted or applied in rooms that are permanently wet!

RD-Aquasorb is suitable to be used in various situations where there is regular condensation and high humidity like in the food industries: breweries, dairy factories, meat and fish processing, … - bathrooms, kitchens, … - buildings, technical rooms with condensation problems …

RD-Aquasorb can be applied on many kinds of surface including steel when used with the appropriate primer.

SUBSTRATES:

Concrete, plaster, steel, plastics with the appropriate primer

APPLICATION CONDITIONS:

Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F). Do not paint under direct heavy sunlight.
Relative humidity: maximum 80 %
Surface temperature must be minimum 3°C (5°F) above dew point.

APPLICATION MEANS:

Brush
Roller: polyamide 10-15 mm
Airless: pressure between 130 bar / 1900 psi and 200 bar / 2900 psi. Nozzle size: 018 – 024

PREPARATION OF THE SUBSTRATE:

The surface must be clean, dust-free, and dry.
Check the technical sheet of the chosen primer for further information.
In case of mold or mosses on the surface, remove it with a special anti-moss product and rinse properly.

DILUTION:

Product is ready-for-use.

DRYING TIME: (20°C – 68°F)

Touch dry (dust free): +/- 1 hour
Recoatable: +/- 4 hours
Dry: +/- 4 hours

CLEANING OF TOOLS:

Water.

SPECIFICITIES:

Mix well before use.

WATER ABSORPTION	INTERNAL TESTS
	ISO 16000-6 / VOC Classification in France